Ultrasonic Cleaning Machine Hardware Plastic Mold In Addition To Glue And Oil Cleaning Equipment
| Size | 500*600*250MM |
| Slot size | 400×500×200MM |
| Voltage | 380V |
| Heating power | 1.5kw |
| Capacity | 38L |
| Model | JR-1018 |
| Direction of ultrasonic | Downside |
| Slot number | 3 |
| Cleaning temperature | 20-95℃ |
Common problems of ultrasonic cleaning machine generator are:
⑴ When the ultrasonic cleaning machine turns on the power switch, the indicator light is not bright. In this case, it is necessary to check whether the power switch is intact and whether the leakage switch is closed. If the switch is intact and then check whether the fuse is overloaded and blown, it can basically be solved.
The ultrasonic cleaning machine open the power switch, the indicator light, but no ultrasonic output. This situation is more complex, first check the transducer and ultrasonic power plate connection plug is loose, and then check whether the fuse is blown. If everything is normal, it may be an internal fault of the ultrasonic power generator. Use a multimeter to make the power line open, and whether the live line is all through. After eliminating the generator fault, check whether the ultrasonic transducer is burned out and whether it needs to be replaced.
⑶ The DC fuse of the ultrasonic cleaning machine is blown. It may be the rectifier bridge pile or power tube burned, it may also be the transducer aging, current instability, which may cause the power generator failure. Pay more attention to maintenance.
Product Tags:
|
|
Industrial Ultrasonic Parts Cleaner For Hardware Plastic Mold In Addition To Glue Oil Images
|
